The kitchen waste disposal equipment is composed of a sound card rack, a transmission device, a feeding part, a juice part, a hydraulic transmission system and a protective cover. The screw is pulled by the motor and the sprocket by the transmission gear reducer. The screw manure feed screw, the squeezing screw and the extrusion forming screw are three parts. The raw material is squeezed through and the squeezing sieve barrel and the raw material are prevented from unloading. The raw material is squeezed Forming is maintained by obstructing doors and stock sieve cylinders at the raw material exit. In the north, there is a feeding box with a filter press filter plate in the cabinet. The processed strawberry peel or fruit and vegetables are put into the cabinet, and part of the juice is discharged through the filter plate of the filter press, and the fruit juice squeezed out by the screw passes through The sieve tube flows to the juice tray, and then is discharged from the juice outlet tube; the squeezed skin residue is removed by the forced door at the end of the sieve tube. The hydraulic transmission system is provided with pressure oil by a hand-held gasoline pump, and the pressure of the hydraulic transmission system is controlled by a pressure gauge; the inflow of pressure oil in the hydraulic transmission system is controlled by a semi-automatic hydraulic reversing valve; the oil cylinder is fixed on the end support plate seat and can be rotated The piston rod of the oil cylinder and the rotatable raw material outlet block the access of the forced door, and the size of the raw material outlet is controlled by the protruding of the piston rod; the wet zone for slag removal can be controlled anytime and anywhere according to requirements.