Straight Shearing Blades for Shearing Machine
Product Description
Product Detail
Find a huge selection of Straight Shearing Blades for Shearing Machine from China at Huixin.
I. Straight Shearing Blades for Shearing Machine introduction:
LK series Straight Shearing Blades for Shearing Machine has an extremely wide range of materials, not only suitable for crushing hard wood, hard disk, electronics, oil drum, circuit board, refrigerator, washing machine shell, etc., but also suitable for tires, woven bags, plastic film and other soft, tough materials. It is widely used in domestic waste treatment, medical waste treatment, environmental treatment of trees, electronic waste recycling, hazardous waste recycling, chemical raw materials, materials with high fiber content, slightly elastic materials, slightly tough materials, materials with a certain degree of softness and other fields.
The equipment adopts differential shear structure, PLC automatic control, crushing ability is strong, high efficiency. It has the characteristics of safe, fast, stable, environmental protection and low noise.
The structure design of the equipment is novel and unique, which is different from the traditional structure. It has the characteristics of beautiful appearance, convenient assembly and disassembly as a whole, and quick tool replacement.
Important: Before using the crusher, please read the operation manual carefully. This manual will provide the equipment operation, use, installation, maintenance and other aspects of information. If you do not follow the instructions for pre-boot inspection or do not follow the instructions for operation, the user shall bear the responsibility for the damage of the crusher caused by user's operation error!!
(The equipment is guaranteed for one year, except for wearing parts)
II. the main structure of the equipment of Straight Shearing Blades for Shearing Machine
III. Main technical parameters of Straight Shearing Blades for Shearing Machine
1. LK - type A
|
Type no. |
power |
Shred working face |
Spindle speed |
The thickness of the blade |
production |
|
LKA-90 |
90KW |
1200*900 |
8-21r/min |
50mm-100mm |
40-80m3/h |
|
LKA-75 |
75KW |
1000*900 |
8-21r/min |
50mm-100mm |
40-60m3/h |
|
LKA-55 |
55KW |
100*800 |
8-21r/min |
50mm-100mm |
30-50m3/h |
|
LKA-45 |
45KW |
900*800 |
8-21r/min |
50mm-100mm |
15-40m3/h |
|
LKA-37 |
37KW |
600*600 |
8-21r/min |
50mm-100mm |
5-15m3/h |
2.LK - type B
|
Type no. |
power |
Shred working face |
Spindle speed |
The thickness of the blade |
production |
|
LKB-90 |
90KW |
1200*900 |
21-32r/min |
30-45mm |
45-60m3/h |
|
LKB-75 |
75KW |
1000*900 |
21-32r/min |
30-45mm |
35-45m3/h |
|
LKB-55 |
55KW |
100*800 |
21-32r/min |
30-45mm |
25-35m3/h |
|
LKB-45 |
45KW |
900*800 |
21-32r/min |
30-45mm |
15-30m3/h |
|
LKB-37 |
37KW |
600*600 |
21-32r/min |
30-45mm |
5-10m3/h |
3. LK - C
|
Type no. |
power |
Shred working face |
Spindle speed |
The thickness of the blade |
production |
|
LKC-90 |
90KW |
1200*900 |
8-21r/min |
10-20mm |
25-30m3/h |
|
LKC-75 |
75KW |
1000*900 |
8-21r/min |
10-20mm |
20-25m3/h |
|
LKC-55 |
55KW |
100*800 |
8-21r/min |
10-20mm |
15-20m3/h |
|
LKC-45 |
45KW |
900*800 |
8-21r/min |
10-20mm |
10-15m3/h |
|
LKC-37 |
37KW |
600*600 |
8-21r/min |
10-20mm |
5-10m3/h |
|
LKC-15 |
15KW |
400*400 |
8-21r/min |
10-20mm |
1-5 m3/h |